How to pair a landline Phone Adapter with your hearing aids
Learn how to connect a Phone Adapter with your hearing aids, so you can use them as a hands-free headset.
Before you start
You need to use an Oticon Phone Adapter and an Oticon ConnectClip to stream phone calls to your hearing aids from a landline phone.
First, connect the Phone Adapter to your landline phone
1
Connect the Phone Adapter to a power outlet.
After a few seconds, the power indicator on the front of the phone adapter will light up green.
2
Disconnect the phone line from the landline phone or base station.
3
Plug the phone line into the Phone Adapter ‘in’ connection socket.
4
Plug the supplied phone cord into the Phone Adapter ‘out’ connector and into the landline socket on your phone or base station.
5
Lift the handset from your landline phone to check for a dial tone.
Next, pair the Phone Adapter to your ConnectClip
1
Make sure the Phone Adapter is powered on.
The power indicator should be steady green.
2
Press the multi button and volume up button on the ConnectClip for about 6 seconds until the status indicator blinks blue.
3
Place the ConnectClip on top of the phone adapter. Pairing takes between 20 – 60 seconds.
4